1.) Open the Play Store
2.) Search for "Global Protect"
3.) Select Global Protect and then click "Install"
4.) Once the Installer is finished, click "Open"
5.) Type vpn.suu.edu into the address field.
6.) Enter your SUU username and password. (If you are a member of SUU Faculty/Staff see below)
Note: The VPN does require two-factor authentication.
- Duo Push: If you typically use the Push feature of Duo and approve the Pushes on your device, then enter your credentials and check your mobile device for a Push that is automatically sent. There is no prompt that a Push has been sent as is typical when logging into the mySUU Portal, so you need to remember to check your device for the Push.
- Passcode: If you typically use a Passcode generated by a FOB or the Duo Mobile app, then when you enter your password you have to append a comma (","), and then the 6-digit passcode generated by your FOB or the Duo Mobile smartphone app. For example, if you push the FOB button or tap the Southern Utah University entry in the Duo Mobile app, and get a Passcode of 123456, and your password is "springtime", then your password for the VPN would be the following: springtime,123456.
- If you are an individual that is not required to use two-factor, then simply enter your password.
7.) The green shield Icon will indicate if you are connected to the VPN.
To Disconnect: Click on the shild icon. The shield icon will turn grey when it's disconnected. You can tap the shield icon to reconnect to the VPN.