Southern Utah University

Course Syllabus

Back to Syllabus Search | Browse by Department
Southern Utah University
Southern Utah University
Spring Semester 2026

Introduction to Residential Architecture using AutoCAD (Face-to-Face)

CCET 1040-02

Course: CCET 1040-02
Credits: 3
Term: Spring Semester 2026
Department: ET
CRN: 13784

Course Description

A basic course stressing the fundamentals of mechanical drafting and design along with architectural drafting and design as specified in the ANSI standards. Emphasis is placed on sketching, geometric construction, orthographic projection, layout procedures, pictorial drawing, and basic dimensioning procedures.

Technical drawing has been an integral part of industry for many years. It is a link between design and manufacturing and construction. Information is quickly communicated to construction and manufacturing companies in the form of drawings prepared to prescribed drafting standards. It is said that a picture is worth a thousand words. Actually, a drawing is worth much more. The speed of graphic comprehension can approach a rate of 50,000 times that of reading. Human beings have always sought the use of tools to make life easier and to enable them to become more productive.

Required Texts

Required Textbook: None.

Learning Outcomes

Course Objectives

Students will have the ability:

  • to select and apply the knowledge, techniques, skills, and modern tools of the discipline to broadly-defined engineering technology activities;
  • to select and apply a knowledge of mathematics, science, engineering, and technology to engineering technology problems that require the application of principles and applied procedures or methodologies;
  • to design systems, components, or processes for broadly-defined engineering technology problems appropriate to program educational objectives;
  • to identify, analyze, and solve broadly-defined engineering technology problems;
  • to apply written, oral, and graphical communication in both technical and non-technical environments; and an ability to identify and use appropriate technical literature;
  • to demonstrate knowledge of the impact of engineering technology solutions in a societal and global context; and
  • to demonstrate a commitment to quality, timeliness, and continuous improvement.
Specific Course Objectives

At the conclusion of this course, students will be able to:

  1. Complete complex drawings using orthographic projection and geometric construction.
  2. Properly use AutoCAD software during the design process.
  3. Perform basic dimensioning.
  4. Perform design and layout procedures.
  5. Complete 1 View Drawings
  6. Complete 2 View Drawings
  7. Complete 3 View Drawings
  8. Complete Section View Drawings
  9. Complete Auxiliary Views Drawings
  10. Complete Assembly View Drawings

Course Requirements

Out of class time will be required to complete all of the assigned drawings.

The course will progress from simple basic drawings to complex sophisticated drawings.

To earn a grade of A students must complete at least 95% of the work, 95% correctly, by the last day of regular classes (not during finals week).

Students will work on drawings while in class. Due dates for each assignment will appear in CANVAS. All work will be submitted electronically through CANVAS.

Evaluation
  • All single part drawings are worth 10 points
  • Unannounced pop quizzes 20 points: There will be unannounced “in class” pop quizzes consisting of a drawing that are in alignment with student skill level at that point in the semester. Pop quizzes can also occur consecutively.
  • Midterm 30 points: The Midterm exam will be an “in class” exam consisting of a drawing that is in alignment with student skill level at mid semester.
  • Final 30 points: The Final exam will be an “in class” exam consisting of a drawing that is in alignment with student skill level at the end of the semester.

Course Outline

Section 1 – 1 View Drawings
Assigned in class

Section 2 – 1 View Drawings using Geometric Construction
Assigned in class

Section 3 - 3 View Drawings using Orthographic Projection
Assigned in class

Section 3 – Auxiliary View Drawings
Assigned in class

Section 4 – Sectional Views Drawings
Assigned in class

Section 5 – Assembly View Drawings
Assigned in class

Section 6 – Civil Design Drawings
Assigned in class

Section 7 – Architectural Drawings
Assigned in class

The instructor reserves the right to substitute and add drawings as needed.

Instructor's policies on late assignments and/or makeup work

No late work will be accepted.

Make up work or extra credit work will only be given once all of the required work is completed.

There is no makeup on any pop quiz.

There is no makeup on the midterm.

There is no makeup on the final. DO NOT ASK TO TAKE THE FINAL EARLY BECAUSE THE ANSWER WILL BE NO. THERE WILL BE A REGULAR FINAL EXAM ONLY GIVEN AND AVAILABLE DURING THE SCHUDLED FINALS TIME ACCORDING TO THE SUU FINALS SCHEDULE.

Attendance Policy

Attendance is not required but strongly recommended and encouraged. Students who do not attend class regularly are ineligible for any type of out class tutoring or assistance with assignments. Any work done outside of class by low attenders (students who attend class less than 75%) will severely scrutinized. If I suspect that you are submitting work you did not complete, you may be asked to demonstrate your ability to complete the work you submitted. If you are unable to complete any work you have submitted, you will receive an F on the assignment.

Course Fees

Content for this section will be provided by the instructor.

Prerequisites

Course Pre-reqs: None

Recommended Textbook is: https://www.sdcpublications.com/Textbooks/Residential-Design-Using-AutoCAD-2026/ISBN/978-1-63057-755-1/

As the instructor, I override any and all information, (due dates, assignments) found in CANVAS or the syllabus. Changes to any information will only be made on a correctional basis.

There will be none of the following:

  • Vulgar jokes or comments said to other students of the same sex or of the opposite sex, or to the instructor.
  • Use of chewing tobacco.

Violation of any of these policies will result in an absence.

Your work and other students work should never meet.

If you are found guilty of plagiarism, you will receive and F for the course.

If by chance you start falling behind though no fault of your own, PLEASE do not drop the class at the first sign of turbulence, please come and visit me. The sooner you come see me, the sooner we can develop a intervention plan to get you back on track.

If for some reason you are feeling bad about life in general, come and see me. I can probably provide you with some insight that will help you feel better about everything.

Required text: Information contained in this syllabus, other than the grading, late assignments, makeup work, and attendance policies, may be subject to change with advanced notice, as deemed appropriate by the instructor.

It is against university policy to submit work AFTER Final Course Grades have been posted. Course grades will NOT be changed after they have been posted unless there is an instructor error. Students will be awarded the grade they earned. Grades are issued on student performance.

Policies: University policies regarding conduct, attendance, and plagiarism will be STRICTLY enforced.

ADA Statement

Students with medical, psychological, learning, or other disabilities desiring academic adjustments, accommodations, or auxiliary aids will need to contact the Disability Resource Center, located in Room 206F of the Sharwan Smith Center or by phone at (435) 865-8042. The Disability Resource Center determines eligibility for and authorizes the provision of services.

If your instructor requires attendance, you may need to seek an ADA accommodation to request an exception to this attendance policy. Please contact the Disability Resource Center to determine what, if any, ADA accommodations are reasonable and appropriate.

Academic Credit

According to the federal definition of a Carnegie credit hour: A credit hour of work is the equivalent of approximately 60 minutes of class time or independent study work. A minimum of 45 hours of work by each student is required for each unit of credit. Credit is earned only when course requirements are met. One (1) credit hour is equivalent to 15 contact hours of lecture, discussion, testing, evaluation, or seminar, as well as 30 hours of student homework. An equivalent amount of work is expected for laboratory work, internships, practica, studio, and other academic work leading to the awarding of credit hours. Credit granted for individual courses, labs, or studio classes ranges from 0.5 to 15 credit hours per semester.

Academic Freedom

SUU is operated for the common good of the greater community it serves. The common good depends upon the free search for truth and its free exposition. Academic Freedom is the right of faculty to study, discuss, investigate, teach, and publish. Academic Freedom is essential to these purposes and applies to both teaching and research.

Academic Freedom in the realm of teaching is fundamental for the protection of the rights of the faculty member and of you, the student, with respect to the free pursuit of learning and discovery. Faculty members possess the right to full freedom in the classroom in discussing their subjects. They may present any controversial material relevant to their courses and their intended learning outcomes, but they shall take care not to introduce into their teaching controversial materials which have no relation to the subject being taught or the intended learning outcomes for the course.

As such, students enrolled in any course at SUU may encounter topics, perspectives, and ideas that are unfamiliar or controversial, with the educational intent of providing a meaningful learning environment that fosters your growth and development. These parameters related to Academic Freedom are included in SUU Policy 6.6.

Academic Misconduct

Scholastic honesty is expected of all students. Dishonesty will not be tolerated and will be prosecuted to the fullest extent (see SUU Policy 6.33). You are expected to have read and understood the current SUU student conduct code (SUU Policy 11.2) regarding student responsibilities and rights, the intellectual property policy (SUU Policy 5.52), information about procedures, and what constitutes acceptable behavior.

Please Note: The use of websites or services that sell essays is a violation of these policies; likewise, the use of websites or services that provide answers to assignments, quizzes, or tests is also a violation of these policies. Regarding the use of Generative Artificial Intelligence (AI), you should check with your individual course instructor.

Emergency Management Statement

In case of an emergency, the University's Emergency Notification System (ENS) will be activated. Students are encouraged to maintain updated contact information using the link on the homepage of the mySUU portal. In addition, students are encouraged to familiarize themselves with the Emergency Response Protocols posted in each classroom. Detailed information about the University's emergency management plan can be found at https://www.suu.edu/emergency.

HEOA Compliance Statement

For a full set of Higher Education Opportunity Act (HEOA) compliance statements, please visit https://www.suu.edu/heoa. The sharing of copyrighted material through peer-to-peer (P2P) file sharing, except as provided under U.S. copyright law, is prohibited by law; additional information can be found at https://my.suu.edu/help/article/1096/heoa-compliance-plan.

You are also expected to comply with policies regarding intellectual property (SUU Policy 5.52) and copyright (SUU Policy 5.54).

Mandatory Reporting

University policy (SUU Policy 5.60) requires instructors to report disclosures received from students that indicate they have been subjected to sexual misconduct/harassment. The University defines sexual harassment consistent with Federal Regulations (34 C.F.R. Part 106, Subpart D) to include quid pro quo, hostile environment harassment, sexual assault, dating violence, domestic violence, and stalking. When students communicate this information to an instructor in-person, by email, or within writing assignments, the instructor will report that to the Title IX Coordinator to ensure students receive support from the Title IX Office. A reporting form is available at https://cm.maxient.com/reportingform.php?SouthernUtahUniv

Non-Discrimination Statement

SUU is committed to fostering an inclusive community of lifelong learners and believes our university's encompassing of different views, beliefs, and identities makes us stronger, more innovative, and better prepared for the global society.

SUU does not discriminate on the basis of race, religion, color, national origin, citizenship, sex (including sex discrimination and sexual harassment), sexual orientation, gender identity, age, ancestry, disability status, pregnancy, pregnancy-related conditions, genetic information, military status, veteran status, or other bases protected by applicable law in employment, treatment, admission, access to educational programs and activities, or other University benefits or services.

SUU strives to cultivate a campus environment that encourages freedom of expression from diverse viewpoints. We encourage all to dialogue within a spirit of respect, civility, and decency.

For additional information on non-discrimination, please see SUU Policy 5.27 and/or visit https://www.suu.edu/nondiscrimination.

Pregnancy

Students who are or become pregnant during this course may receive reasonable modifications to facilitate continued access and participation in the course. Pregnancy and related conditions are broadly defined to include pregnancy, childbirth, termination of pregnancy, lactation, related medical conditions, and recovery. To obtain reasonable modifications, please make a request to title9@suu.edu. To learn more visit: https://www.suu.edu/titleix/pregnancy.html.

Disclaimer Statement

Information contained in this syllabus, other than the grading, late assignments, makeup work, and attendance policies, may be subject to change with advance notice, as deemed appropriate by the instructor.